Earthing PU Cord

Product & Safety Care While Using Earthing PU Cord

Your new earthing fabric product is make with natural cotton and silver thread. Please follow the guidelines below:

Dos

Wash a minimum of  2x per moth

Wash in a washing machine

Wash with warm water

Dry in a dryer on low or line dry

Use a liquid laundry detergent

It is good to wash your Earthing product.

It will be harmed by washing , in fact it is beneficial. Washing u warm water strips body sweat and natural skin oils from the silver keeping it conductive,

Don’ts

Don’t wash with bleach or fabric softeners.

Don’t use whitening detergents, oxi-detergents or detergents with oils like lavender or coconut oil.

Don’t use dryer sheet fabric softeners.

Don’t apply lotions or body oils before bed.

Bleach, body lotions and oils can tarnish the silver tread rendering it non conductive. Fabric softener builds up on the silver and also ruins its conductive properties. It is advised to want one hour to use the product after applying lotion to the skin, Iron using low heat.

Safety warming

Always use as directed. The earthing connection outlet ground checker is designed for 120V 60Hz use only! AVOID  POTERNTIONAL SHOCK HAZARD. Use only earthing approved connecting cord with built-in internal safety feature. If your outlet ground checker does not display 2 amber lights, then do not use the product before consulting an electrician. For your safety, locate any connecting cord in such a way that it doesn;t case a tripping hazard.

Start hear

In order to use your earthing product, you must connect it to the ground port of a  grounding 3 prong outlet.  Before plugging in your earthing product, you must check that the outlet is grounded by plugging in the outlet checker(Supplied)

2 AMBER LIGHTS

Illuminated is GOOD and  means that your have a proper ground and your are ready to connect your earthing product.

OTHER LIGHT COMBINATIONS

Means your outlet is NOT properly grounded. Try testing another outlet, If it still does not work, then you will need to use a grounding rod.

How TO USE IT?

1. Snap the cord onto the connecting tab on your Earthing Universal Mat.
2. Insert the end of Earthing Cord into the 3^rdhold of a grounding wall outlet. Please see cover to test your outlet and make sure it is grounded.
3. Only the snap side of the Universal Mat and the striped side of the Mat cover are conductive.
4. You muse make direct skin contact with these surfaces.