Earthed Rob Grounding Cable

 

How to use the rob grounding cable?

1. First push the Ground Rod directly into the earth (8-10 ‘’). Close to the foundation of the building.
2. Run the cord from the Ground Rod, under or around a window or door, near where you will be using your product. Make sure to cover the cord to prevent tripping.
3. Plug the prong end of your cord into the receptical end of the Ground Rod cord.
4. If you live in a dry are, such as a desert, soak the earth around the Ground Rod from time to time for maximim conductivity.

Product & Safety Care

Your new earthing fabric product is make with natural cotton and silver thread. Please follow the guidelines below

 

Dos

Wash a minimum of  2x per moth

Wash in a washing machine

Wash with warm water

Dry in a dryer on low or line dry

Use a liquid laundry detergent

 

It is good to wash your Earthing product.

It will be harmed by washing , in fact it is beneficial. Washing u warm water strips body sweat and natural skin oils from the silver keeping it conductive,

 

 

Don’ts

Don’t wash with bleach or fabric softeners.

Don’t use whitening detergents, oxi-detergents or detergents with oils like lavender or coconut oil.

Don’t use dryer sheet fabric softeners.

Don’t apply lotions or body oils before bed.

 

Bleach, body lotions and oils can tarnish the silver tread rendering it non conductive. Fabric softener builds up on the silver and also ruins its conductive properties. It is advised to want one hour to use the product after applying lotion to the skin, Iron using low heat.

 

 

Safety warming

Always use as directed. The earthing connection outlet ground checker is designed for 120V 60Hz use only! AVOID  POTERNTIONAL SHOCK HAZARD. Use only earthing approved connecting cord with built-in internal safety feature. If your outlet ground checker does not display 2 amber lights, then do not use the product before consulting an electrician. For your safety, locate any connecting cord in such a way that it does not case a tripping hazard.

Start here

In order to use your earthing product, you must connect it to the ground port of a  grounding 3 prong outlet.  Before plugging in your earthing product, you must check that the outlet is grounded by plugging in the outlet checker(Supplied)

2 AMBER LIGHTS

Illuminated is GOOD and  means that your have a proper ground and your are ready to connect your earthing product.

OTHER LIGHT COMBINATIONS

Means your outlet is NOT properly grounded. Try testing another outlet, If it still doesn,t work, then you will need to use a grounding rod.